Custom program error

0x178c6028

Appears in logs as custom program error: 0x178c

Anchor

Custom error #28

“custom program error: 0x178c”

Code 6028 (0x178c) is not an Anchor framework error. Anchor programs number their own #[error_code] enum starting at 6000, so this is the 29th variant (index 28) of the error enum defined by the program you called.

Common causes

  • The program's instruction handler returned the error at index 28 of its custom error enum. What that means depends entirely on the program.

How to fix it

  • Look at the program logs: Anchor prints Error Code: <Name>. Error Number: 6028. Error Message: <text> just before the failure.
  • Open the program's IDL (on an explorer or via anchor idl fetch <programId>) and find the errors entry with code 6028.
  • In the Rust source, count variants in the #[error_code] enum: variant 28 (zero-based) is the one that fired.
Source definition ↗All Anchor errors →

How Anchor custom error numbers work

Every Anchor program declares its own errors with #[error_code]. Anchor assigns the first variant 6000, the second 6001, and so on, so they never collide with the framework’s own errors (100–5999). The hex you see in logs is simply that number in base 16: 6000 = 0x1770, 6001 = 0x1771, 6002 = 0x1772.

#[error_code]
pub enum MyError {
    #[msg("Amount must be greater than zero")]
    ZeroAmount,          // 6000 = 0x1770
    #[msg("Slippage tolerance exceeded")]
    SlippageExceeded,    // 6001 = 0x1771
    #[msg("Pool is paused")]
    PoolPaused,          // 6002 = 0x1772
}

To find out what 0x178c means for the program you called, fetch its IDL and look at the errors array, or look for the Error Message: log line Anchor prints before the failure. The transaction decoder pulls these log lines out of a failed signature for you.

Decode another error

Try:

Nearby codes

0x1789Custom error #250x178aCustom error #260x178bCustom error #270x178dCustom error #290x178eCustom error #300x178fCustom error #31